Crosscut Saws
Alternate Bevel Saws SERIES 340 - Crosscut
Series 340 is an ideal saw for cutting perspex, veneer, chipboard, plywood, timber and other multiple grain directed materials. The saw produces a very good, clean finish which makes it excellent for mitering. Recommended for general usage in cabinet-making Fitted with sub-micron tungsten carbide tips.
Series 340 LN is a hi-tech, low noise vibration reduced saw with the same geometry as the 340 Series.
Series 340 LN is a hi-tech, low noise vibration reduced saw with the same geometry as the 340 Series.
Also available in Series 340LN. Hi Tech low noise & vibration reduced saws.
*Add bore size to ref no. in mm.
*Add bore size to ref no. in mm.
- Show All Shop Categories
- Saw Blades and Accessories
- Industrial Saw Blades
- Alternative Bevel and Square Tooth Saws
- Laminate Cutting Saws - Hollow Face
- Metal Cut off Saws
- Triple Chip Positive Rake Veneer and Laminate Saws
- Panel Sizing Saws
- Scoring Saws
- Triple Chip Negative Rake Aluminum Cutting Saws
- Triple Chip Positive Rake Aluminium Cutting Saws
- Aluminium Composite Panel Saws
- Square Top Negative Rake Aluminium Section Saws
- Grooving Saws for Spindle Moulders
- Biscuit Joint Saws
- Rapier Saw Blades for Portable Machines
- Rapier Alternate Negative Rake
- Rapier Aluminium Saw Blades for Portable Machines
- Elite Saw Blades Thin Kerf for Portable Machines
- Demolition Saw Blades
- Dado Sets, Box Joint Saws and Apex Heads
- Sawbench Accessories
- Saw Bushes
- Industrial Saw Blades
LINBIDE
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz