SHOPPING CART 
Straight Router Bits
Profiling and Drilling Panel Bits - 25mm Long Shank
Plunge router machines will make a clean starting hole with this cutter. A tungsten carbide tip is fitted into the end of the cutter for bottom cutting. Not suitable for aluminium.
| 1/4" (6.4mm) Diameter x 1" (25mm) Long Shank | ||||||
|---|---|---|---|---|---|---|
| REF.NO. | CUTTER | DIAMETER | CUTTER | LENGTH | PRICE | BUY |
| 3.2M4 | 3.2mm | 1/8" | 10mm | 3/8" | NZD$38.31 |  |
| 5M4 | 5.0mm | 3/16" | 10mm | 3/8" | NZD$38.31 | |
| 6M4 | 6.0mm | 15/64" | 16mm | 5/8" | NZD$38.31 | |
| 6.4M4 | 6.4mm | 1/4" | 16mm | 5/8" | NZD$38.31 | |
| 10M4D | 10.0mm | 24/64" | 19mm | 3/4" | NZD$41.60 | |
| 11M4D | 11.0mm | 7/16" | 19mm | 3/4" | NZD$41.60 | |
| 12M4D | 12.0mm | 15/32" | 19mm | 3/4" | NZD$41.60 | |
| 13M4D | 13.0mm | 33/64" | 19mm | 3/4" | NZD$41.60 | |
| 14M4D | 14.0mm | 9/16" | 19mm | 3/4" | NZD$41.60 | |
| 15M4D | 15.0mm | 19/32" | 19mm | 3/4" | NZD$41.60 | |
| 16M4D | 16.0mm | 5/8" | 19mm | 3/4" | NZD$41.60 | |
| 18M4D | 18.0mm | 45/64" | 19mm | 3/4" | NZD$41.60 | |
| 19M4D | 19.0mm | 3/4" | 19mm | 3/4" | NZD$41.60 | |
| 20M4D | 20.0mm | 25/32" | 19mm | 3/4" | NZD$41.60 | |
- Show All Shop Categories
- Routers Bits and Accessories
- Router Bits (Tungsten Tipped)
- Straight Router Bits
- Router Collet Extension
- Motorbody Building Bits
- Rounding Over Bits
- Ball Nose and Coving Bits
- Ogee Bits
- Classical Profile and Furniture Mouldings
- Chamfer and Angle Bits
- Dovetail, Angle Cutters and Vee Grooving
- Edge Radius Bits
- Moulding Bits and Inside Radius Bits
- Plinth Router Bits and Vee Grooving Bits
- Inverted Template & flush Trim Router Bits
- Profile and Furniture Moulding Bits
- Draw Pull and Combination Bits
- Nosing and Rebating Bits
- Classical Regency and Reeding Bits
- Mitre Lock Bits
- Profile Bits for Wardrobe Doors
- Profile Bits for Cupboard Doors
- Furniture Joining Bits
- Flush Trim & Template Following Bits
- Combination Laminate and Trimming Bits
- Edge Grooving Cutter
- Laminate Trimming and Beveling Bits
- Solid Surface Router Bits
- Solid Surface Kits
- Three Wing Moulding Cutters
- Weather Strip Grooving Router Bits
- Arbours and Bearing and Shim Spacers
- Compression and Spiral Router Bits
- HSS Aluminium Joinery Cutters
- Indexable Router Bits
- Indexable Blades
- Templates Accessories and Profile Cutterhead
- Router Bits (Tungsten Tipped)
LINBIDE
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz